NinjasInPyjamas MODERATOR
Posts : 10 Points : 1003787 Thanks : 5 Join date : 2014-01-02
| Subject: Re: config problems for liquid evita Tue Jan 07, 2014 8:26 am | |
| i am getting this error i am trying to compile from scratch \
Which would you like? [aosp_arm-eng] 1 build/core/product_config.mk:250: *** No matches for product "liquid_evita". Stop.
** Don't have a product spec for: 'liquid_evita' ** Do you have the right repo manifest?
| |
|
WARP3D420\Admin BIG DOG STATUS
Posts : 195 Points : 3004028 Thanks : 7 Join date : 2014-01-02 Age : 46 Location : In da Swamps
| Subject: config problems for liquid evita Tue Jan 07, 2014 12:30 pm | |
| go to vendor and add it to the "jenkin-build targets" or equivalent, then check your vendorsetup.sh in device and add if needed make sure it is pointing at that title "liquid_evita" also re-check system.prop, boardconfig, etc and make sure the codenames are the same
We will be adding a tut for the device tree. a better tut than from my source tut.
Also I would check the permissions on every file in the device tree, make sure permissions are correct on all executable
you would have to send me a copy of the d tree and vendor in a tar or zip file and I can look to see what you got. to , LEGION MODZ TEAM FORUM :: ROOT THE WORLD :: LINK BIN :: Legion modz link bin
there is also a file you have to make vendorsetup.sh
add_lunch_combo full_evita-eng
add_lunch_combo full_evita-userdebug
or
add_lunch_combo cm_evita-eng <---mostly to build recovery
add_lunch_combo cm_evita-userdebug <--- . build/envsetup.sh && brunch evita
you don't need to use a -eng command during your build in your case add_lunch_combo liquid_evita-userdebug I guess
Seeing as where we are both starting from scratch. We may learn from each other.
You can go through your phone with root browser and find sys files for your prop list.
Last edited by WARP3D420Admin on Fri Jan 24, 2014 4:55 am; edited 2 times in total | |
|
NinjasInPyjamas MODERATOR
Posts : 10 Points : 1003787 Thanks : 5 Join date : 2014-01-02
| Subject: Re: config problems for liquid evita Wed Jan 08, 2014 8:25 am | |
| | |
|
WARP3D420\Admin BIG DOG STATUS
Posts : 195 Points : 3004028 Thanks : 7 Join date : 2014-01-02 Age : 46 Location : In da Swamps
| Subject: Re: config problems for liquid evita Tue Jan 14, 2014 12:17 am | |
| | |
|
NinjasInPyjamas MODERATOR
Posts : 10 Points : 1003787 Thanks : 5 Join date : 2014-01-02
| Subject: Re: config problems for liquid evita Tue Jan 14, 2014 7:23 am | |
| i have tried but same result, sorry for late reply i was busy at work, warp if i send you my device folder and vendor can you take a look?? | |
|
WARP3D420\Admin BIG DOG STATUS
Posts : 195 Points : 3004028 Thanks : 7 Join date : 2014-01-02 Age : 46 Location : In da Swamps
| Subject: Re: config problems for liquid evita Tue Jan 14, 2014 1:12 pm | |
| Yep send it to the link bin. I fixed the permissions on that folder so members can access it. I can't say I can fix it but I can see what is there and if its missing anything. All I have to do is "make clobber" and try a couple builds. | |
|
NinjasInPyjamas MODERATOR
Posts : 10 Points : 1003787 Thanks : 5 Join date : 2014-01-02
| Subject: Re: config problems for liquid evita Mon Jan 27, 2014 6:11 pm | |
| sorry man i was very busy at work. i will get things done in few days | |
|
Sponsored content
| Subject: Re: config problems for liquid evita | |
| |
|